Usb Wireless Adapter For Mac Os X 10.4.11

Computer System Requirements

So it doesn't have a USB 3.0 port, only USB 2.0. Also, the built in wireless isn't working, hence my desire to try an external adapter. I tried an ASUS N13 adaptor, which has drivers that go up to 10.7, but I wasn't able to get it working for El Capitan.

Microsoft Windows

Important: It is strongly recommended Windows XP be updated to Service Pack 3. This update will increase overall improvement to the performance of the computer.

Windows XPWindows VistaWindows 7
Processor

300 MHz 32-bit

Note:

64-bit is not supported

1 GHz 32-bit

1 GHz 64-bit

1 GHz 32-bit

1 GHz 64-bit

RAM256 MB1 GB1 GB
Hard Drive Space50 MB50 MB50 MB
Web BrowserIE 5.5IE 7IE 8
OS Service Pack / VersionService Pack 2 or laterService Pack 0 or laterService Pack 0 or later
USB VersionUSB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

Mac OS X

Important: Mac 10.7 (Lion) is not officially supported, but can work if Java Realtime is installed.

Mac OS X 10.4 (Tiger)Mac OS X 10.5 (Leopard)Mac OS X 10.6 (Snow Leopard)
ProcessorPower PC G3876 MhzIntel
RAM256 MB512 MB1 GB
Hard Drive Space100 MB120 MB160 MB
Web BrowserSafariSafariSafari
OS Service Pack / VersionVersion 10.4.11 or laterVersion 10.5.8 or laterVersion 10.6.4 or later
USB Version

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

Indicators

Indicator Lights

Use the following table to understand what status the indicator light is showing:

LightStatus
Blinking green twice every 3 secondsData stick is powered on
Blinking green once every 3 seconds2G registration
Blinking blue once every 3 seconds3G registration
Blinking redData stick is powered on and searching for the SIM card
Solid redData stick is powered on and searching for an available network (2G, 3G, 4G)
Solid GreenEstablished 2G connection
Solid blueEstablished 3G connection
OffNo power

Refer to the picture below to determine the location of the indicator light:

Memory Card

Access files on card

How to access files on a memory card from a computer

To view files on a memory card from a computer, follow these steps:

  1. From your computer, open the Start menu, and click on Computer.
  2. Double-click on the appropriate drive.
  3. Navigate to and access the desired files or folders.

Copy files from card to computer

How to copy files from a memory card to a computer

To copy files from a memory card to a computer, follow these steps:

  1. From your computer, open the Start menu, and click on Computer.
  2. Double-click on the appropriate drive.
  3. Drag and drop the desired files or folders to the desired location on your computer.

Copy files from computer to card

How to copy files from a computer to a memory card

To copy files from a computer to a memory card, follow these steps:

  1. From your computer, open the Start menu, and click on Computer.
  2. Double-click on the appropriate drive.
  3. Navigate to the desired folder on the memory card.
  4. In a separate window, navigate to the desired folders or files on your computer.
  5. Drag and drop the files from the computer's folder to the desired folder on the memory card.

Delete files on card

How to delete files on a memory card from a computer

To delete files on a memory card from a computer, follow these steps:

  1. From your computer, open the Start menu, and click on Computer.
  2. Double-click on the appropriate drive.
  3. Navigate to the desired folder on the memory card.
  4. Right-click on the file or folder you want to delete.
  5. Click Delete.
  6. Click Yes to confirm.

Insert/Remove card

How to insert or remove a memory card

To insert or remove a memory card, follow these steps:

  1. Open the microSD door on the side of the laptop stick.
  2. Insert the card as shown, and push it in until it locks into place.
    • Note: To remove a card that is already inserted, push in on the card slightly to unlock it and then slide it out of the microSD memory card slot.
  3. Close the microSD door and push it into place.
Usb

Usb Wireless Adapter For Mac Os X 10.4.111

SIM card

Insert / Remove SIM card

How to insert or remove the SIM card

Usb Wireless Adapter For Mac Os X 10.4.11 Mac Os X 10 4 11

Related error: 'Insert SIM'

To insert

  1. Detach the SIM card from the card holder.
  2. Slide down and remove the back cover.
  3. Slide the SIM card into the slot (as shown below).
  4. Close the back cover.

To remove

  1. Slide down and remove the back cover.
  2. Slide the SIM card out of the slot (as shown below).

Supported Computer Systems

  • Windows XP SP3 or newer
  • Mac OS X 10.4.11 or newer
    Important: If you are using Mac OS X 10.7 will need to download and install the T-Mobile Connection Manager from the T-Mobile Download Center.

Indicators

Indicator Lights

Use the following table to understand what status the indicator light is showing:

LightStatus
Blinking green twice every 3 secondsLaptop stick is powered on
Blinking green once every 3 seconds2G registration
Blinking blue once every 3 seconds3G or 4G registration
Blinking redLaptop stick is powered on and searching for the SIM card
Solid redLaptop stick is powered on and searching for an available network (2G, 3G, 4G)
Solid GreenEstablished 2G connection
Solid blueEstablished 3G or 4G connection
OffNo power

Liquid Damage Indicators (LDI)

Each T-Mobile device includes an indicator that shows if it has been subjected to water, thereby voiding the warranty.

To view the LDI, remove the back cover from the device. Refer to the following illustrations to read the label:

Usb Wireless Adapter For Mac Os X 10.4.11reset Mac Os X 10 4 11

White LDI (indicates no liquid damage)Red LDI (indicates liquid damage)

Memory card

Insert or remove a memory card

Your laptop stick supports a microSD memory card (not included with your purchase).

  1. Remove the cover using the notch located on the bottom-edge of the device.
  2. Insert or remove the memory card into the memory card slot as shown:
    • Insert: Slide the memory card into the slot and push until it clicks into place.
    • Remove: Push the memory card in and release. It will eject out of the slot.
  3. Replace the back cover by pressing down until it snaps into place.

Usb Wireless Adapter For Mac Os X 10.4.111 Download

SIM card

Insert or remove the SIM card

Your laptop stick requires a SIM card to connect to the T-Mobile network. A SIM card was included with your purchase and has been pre-installed in the laptop stick.

  1. Remove the cover using the notch located on the bottom-edge of the device.
  2. Insert or remove the SIM card into the SIM card slot, as shown.
  3. Replace the cover by pressing down until it snaps into place.
Comments are closed.